The bit everyone hates, electrical problems. Hope you find your fix here. Posting restricted to registered users.
Tommo
Posts: 3 Joined: Sat Aug 08, 2020 5:38 pm
AntiSpam: No
Post
by Tommo » Sat Dec 05, 2020 12:26 pm
Hi guys I need some help,
I stripped my clocks for cleaning refurb and did not take a photo of the 3 wires that go to the temp gauge DOH
looking at the rear of the temp gauge could somebody please tell me the colour and sequence from the top to bottom
many thanks in advance
Tommo
Posts: 3 Joined: Sat Aug 08, 2020 5:38 pm
AntiSpam: No
Post
by Tommo » Sat Dec 05, 2020 12:32 pm
or left to right
JNJ
Posts: 2 Joined: Mon Mar 09, 2020 4:54 pm
AntiSpam: No
Post
by JNJ » Sun Dec 06, 2020 10:13 pm
If I read the wiring diargam correctly, it should be, from left to right:
Green, Black/Brown, Green/Blue
You do not have the required permissions to view the files attached to this post.
Alastair
Posts: 1808 Joined: Sat May 25, 2002 1:01 am
Location: Glossop U.K.
Contact:
Post
by Alastair » Fri Dec 11, 2020 10:55 am
I'll have the upper off mine at the weekend to put the bits back I removed to copy. I'll post a pic
Alastair
Posts: 1808 Joined: Sat May 25, 2002 1:01 am
Location: Glossop U.K.
Contact:
Post
by Alastair » Sat Dec 12, 2020 3:50 pm
Looking from front of bike
Green in middle, black right ang green/blue to left.
Tommo
Posts: 3 Joined: Sat Aug 08, 2020 5:38 pm
AntiSpam: No
Post
by Tommo » Mon Dec 14, 2020 4:21 pm
That is excellent guys thanks very much for your help