NS400CR Part 2 - Progress

If your problem does not fall into the above catagories, hopefully you will find some answers here. Posting restricted to registered users.
Post Reply
Posts: 227
Joined: Mon Jul 10, 2006 6:36 pm

Re: NS400CR Part 2 - Progress

Post by Racer »

Re: NS400CR Part 2 - Progress
Report this post
Postby starboy869 » Sat Dec 31, 2016 6:07 am

I read through your threads on your build.

Just one question if you or something else could answer. Which year of YZ125 piston did you end up using?


If it is to any help, I used Wiseco YAMAHA YZ125 86-88 PRO-LITE 2244CS pistons in my race engine. Bear in mind i kept the std bores at 57 mm. Ypu may get them in bigger sizes aswell.

ESW Rotax 250 tandem twin racer, VFR400R Racer, NS400CR Racer, NS400R street special/VFR400R racer hybrid, Kawasaki S2 350, Yamaha RD500LC. RGV250 VJ23. Bianchi Motor Sport P2 "Compe Cliente" minimoto

Posts: 4
Joined: Sun Jul 22, 2012 11:38 pm
AntiSpam: No

Re: NS400CR Part 2 - Progress

Post by starboy869 »

Thank you for the information. I'll probably go with the standard bore as well.

Once I get into my project I'll be posting a build thread but est time is at least a year.

Post Reply