One piece race seat

Needs no description. Posting restricted to registered users
Post Reply
Mark
Posts: 1360
Joined: Thu Oct 25, 2001 1:01 am
Location: Up Norf

One piece race seat

Post by Mark »

Hot off the Classic Race Replicas production line...

Single piece race seat, which retains the standard look of the bike.

Image

Image

Image

Image

Image

Uses standard fixing points for the tank and side panel. There are two additional fixings at the top, which can be used to hold the seat unit on to the rear subframe. All that's required is a small piece of 3mm flat bar with a couple of nutserts, rivet nuts or similar.

Looks great and means that you can do away with the steel rear cowl subframe, seat lock etc, which saves around 3kg in weight!

Available with or without a replica rear pad. Can be supplied with fittings.

Requires foam seat pad.

Priced around £150 for the bare seat unit.

Can be supplied with the rear light unit filled in if required, though some production based race classes, such as CRMC, require the rear light to be fitted.

If you can't wait for Ian to produce another batch, I'll sell mine for £200 :wink:
If it ain't broke, fix it 'til it is.

Alastair
Posts: 1809
Joined: Sat May 25, 2002 1:01 am
Location: Glossop U.K.
Contact:

Re: One piece race seat

Post by Alastair »

Looks to be a quality job. Wouldn't expect anything else from Ian :D

Post Reply