Hydraulic Clutch

All your power station questions answered. Posting restricted to registered users.
Post Reply
Seacoast69
Posts: 42
Joined: Fri Dec 04, 2015 7:41 pm
AntiSpam: No

Hydraulic Clutch

Post by Seacoast69 »

Has anyone tried doing a hydraulic clutch set-up ?

geosot
Posts: 1
Joined: Mon Sep 17, 2012 1:14 pm
AntiSpam: No

Re: Hydraulic Clutch

Post by geosot »

Not yet but I am willing to make one.

Channel Hopper
Posts: 1304
Joined: Thu Sep 23, 2004 5:26 pm

Re: Hydraulic Clutch

Post by Channel Hopper »

Magura is the brand that makes conversion kits for 80s bikes including Honda two strokes. 10mm travel only though.

https://www.magura.com/en/components/po ... ge/?p=1853

Whilst it is claimed there is 20% less pull required, I'm not too sure the return is worth it, what with initial outlay, weight increase, complexity, the 'feel' one gets from a cable operated system and the fact this is just a small capacity engine.

Has anyone that uses the NS on trackdays or serious racing ever fitted this ?

Alastair
Posts: 1796
Joined: Sat May 25, 2002 1:01 am
Location: Glossop U.K.
Contact:

Re: Hydraulic Clutch

Post by Alastair »

Might be worth it on a 500 conversion. With heavier clutch springs

Post Reply